Industries and Applications

Hyperion Materials & Technologies' hard and super-hard materials product offerings are based on a wide range of common applications.

You are welcome to contact us if you need advice on product selection or other technical support.

icon

Aerospace

Hyperion Materials & Technologies has manufactured cemented carbide components used in engines, helicopters, and airplanes for over two decades. The strength and wear resistance of cemented carbide make it the best choice for aerospace components, as other materials cannot withstand the tough environmental conditions. The properties of cemented carbide allow it to adapt to conditions as equipment performance intensifies. Hyperion Materials & Technologies has received the EN9100:2016 certification for our Epinouze, France location. Hyperion also manufactures other hard and super-hard materials used to produce aerospace components, including cubic boron nitride (CBN) and diamonds. Aluminum and steel components benefit from a much longer life if coated in our patented composite diamond coating. This coating can be applied to any shape regardless of intricacy and without line of sight.
icon

Automotive

Hyperion Materials & Technologies has more than 20 years of experience developing and manufacturing cemented carbide solutions that meet the requirements of the automotive industry. Our cemented carbide has great dimensional stability due to a high Young's modulus and compressive strength while featuring a low coefficient of thermal expansion. Hyperion's Barcelona facility has IATF 16949:2016 certification for manufacturing cemented carbide components. Hyperion also manufactures other hard and super-hard materials used to produce automotive components, including cubic boron nitride (CBN) and diamonds.
icon

Electronics

Hyperion Materials & Technologies has manufactured cemented carbide components used in the electronics industry for over two decades. Cemented carbide allows for the high precision required in the electronics industry and the ability to easily handle large volumes at a high rate of speed. Hyperion also manufactures other hard and super-hard materials used to produce electronics components, including mesh and micron diamonds and diamond slurries.
icon

Food and Beverage

Hyperion Materials & Technologies has manufactured cemented carbide components used in food processing and fluid handling for over thirty years. The strength and wear resistance of cemented carbide make it the best choice for food and beverage components such as wear parts for cutting and fluid handling and rotary cutters for carton and packaging cutting. Aluminum and steel components benefit from a much longer life if coated in our patented composite diamond coating. This coating can be applied to any shape regardless of intricacy and without line of sight. Hyperion is a leader in the global manufacturing of engineered can tool solutions and product development for the can maker.
icon

Hygiene

Hyperion Materials & Technologies has manufactured cemented carbide components used in the hygiene industry for over 30 years. Hyperion's cemented carbide rotary cutting solutions increase efficiency and reduce waste in the production of babycare, femcare, and adultcare disposable hygiene products.
icon

Medical

Hyperion Materials & Technologies has manufactured cemented carbide components used in medical wear parts for over thirty years. The strength and wear resistance of cemented carbide make it the best choice for medical components such as dental bur blanks and rotary cutters for medical products cutting. Cemented carbide's combination of strength, hardness, and toughness satisfies the most demanding applications. Hyperion also manufactures other hard and super-hard materials used to produce medical components, including polycrystalline cubic boron nitride (PCBN).
icon

Mining

Hyperion Materials & Technologies manufactures application-specific cemented carbide for wear protection for critical components in various mining applications. These include but are not limited to tip plates for vertical shaft impact (VSI) crushers, studs and edge protection for high pressure grinding rollers (HPGR), and belt scraper parts for material handling. We also manufacture cemented carbide buttons for mining and oil and gas exploration tools. Hyperion also manufactures other hard and super-hard materials used to produce mining components, including mesh and polycrystalline diamonds.
icon

Oil and Gas

Hyperion Materials & Technologies manufactures a variety of cemented carbide products for the oil and gas drilling industry. These include but are not limited to cemented carbide buttons, stabilizers, and fishing and milling tool inserts. Hyperion also manufactures other hard and super-hard materials used to produce mining components, including mesh and polycrystalline diamonds.
icon

Steel

Hyperion Materials & Technologies has more than 20 years of experience developing cemented carbide solutions that meet the requirements of the steel industry. Our cemented carbide has great dimensional stability due to a high Young's modulus and compressive strength while featuring a low coefficient of thermal expansion. Aluminum and steel components benefit from a much longer life if coated in our patented composite diamond coating. This coating can be applied to any shape regardless of intricacy and without line of sight. Hyperion also manufactures other hard and super-hard materials used to produce automotive components, including micron and polycrystalline cubic boron nitride (CBN) and polycrystalline diamonds (PCD).
icon

Tooling

Hyperion Materials & Technologies manufactures application-specific cemented carbide for tooling. These include but are not limited to carbides for can tooling, wear parts, and rotary tool blanks. Hyperion also manufactures other hard and super-hard materials used to produce tooling components, including polycrystalline cubic boron nitride and polycrystalline diamonds.