Hyperion Materials & Technologies has established capabilities to engineer and tailor cemented carbide (tungsten carbide (WC)) properties to offer high performance components and sub-assemblies to suit a wide range of applications in oil and gas industry. The experience of making flow control needle & seat, plug & cage, and sleeve & cage sub-assemblies with different materials, corresponding attachments, and finishing processes has enabled Hyperion to develop capabilities that can be applied to a range of products.
Hyperion Materials & Technologies manufactures premium cemented carbide compacts in a range of grades with combination of toughness and hardness to offer the best drilling performance for tricone and hybrid drill bits. The properties of each compact are designed by tailoring the carbide chemistry and microstructure to deliver the best performance in impact, abrasion, oxidation, and thermal fatigue (causing snake skin).
Hyperion Materials & Technologies manufactures tailor-made cemented carbide threaded nozzles and sleeves of various sizes. These are offered in cemented carbide grades that have been proven through internal research and development as well as at customer sites. Our nozzles and sleeves have been successfully used for drill bits in the oil and gas drilling.
Hyperion Materials & Technologies manufactures highly engineered cemented carbide substrates for polycrystalline diamond (PDC) enhanced cutters. Our carbide substrates are manufactured with a range of interface geometries and metallurgical properties to meet the requirements for PDC cutters.
Hyperion Materials & Technologies manufactures high quality inserts for stabilizer pads in both cemented carbide and polycrystalline diamond (PCD).
Hyperion Materials & Technologies manufactures high performance cemented carbide shaped inserts for fishing and milling tools. They are mass produced in the state-of-the-art robotic presses with high quality and metallurgical consistency.
Hyperion Materials & Technologies manufactures standard cemented carbide chokes, seats, and points in a range of sizes and cemented carbide grades.
Hyperion Materials & Technologies manufactures cemented carbide finished valve components with final tolerances exact enough that they can be directly assembled or used to make sub-assemblies for flow control valves.
Hyperion Materials & Technologies offers flow control sub-assemblies manufactured by joining a cemented carbide finished valve component with a stainless steel/Inconel component to meet customer valve design specifications.
Hyperion Materials & Technologies partners with its customers to develop tailor-made solutions and manufactures precision components and sub-assemblies* for:
- Directional drilling
- Completion tools
- Pressure pumping
- Well services.
Sub-assemblies are cemented carbide components usually joined with other materials including stainless steel, Inconel, titanium, and diamond that are finished and ready for direct assembly into customers’ tools.
Hyperion Materials & Technologies manufactures premium cemented carbide compacts in a range of grades with combination of toughness and hardness to offer the best drilling performance for tricone and hybrid drill bits. The properties of each compact are designed by tailoring the carbide chemistry and microstructure to deliver the best performance in impact, abrasion, oxidation, and thermal fatigue (causing snake skin).
Hyperion Materials & Technologies manufactures tailor-made cemented carbide threaded nozzles and sleeves of various sizes. These are offered in cemented carbide grades that have been proven through internal research and development as well as at customer sites. Our nozzles and sleeves have been successfully used for drill bits in the oil and gas drilling.
Hyperion Materials & Technologies manufactures highly engineered cemented carbide substrates for polycrystalline diamond (PDC) enhanced cutters. Our carbide substrates are manufactured with a range of interface geometries and metallurgical properties to meet the requirements for PDC cutters.
Hyperion Materials & Technologies manufactures high quality inserts for stabilizer pads in both cemented carbide and polycrystalline diamond (PCD).
Hyperion Materials & Technologies manufactures high performance cemented carbide shaped inserts for fishing and milling tools. They are mass produced in the state-of-the-art robotic presses with high quality and metallurgical consistency.
Hyperion Materials & Technologies manufactures standard cemented carbide chokes, seats, and points in a range of sizes and cemented carbide grades.
Hyperion Materials & Technologies manufactures cemented carbide finished valve components with final tolerances exact enough that they can be directly assembled or used to make sub-assemblies for flow control valves.
Hyperion Materials & Technologies offers flow control sub-assemblies manufactured by joining a cemented carbide finished valve component with a stainless steel/Inconel component to meet customer valve design specifications.
Hyperion Materials & Technologies partners with its customers to develop tailor-made solutions and manufactures precision components and sub-assemblies* for:
- Directional drilling
- Completion tools
- Pressure pumping
- Well services.
Sub-assemblies are cemented carbide components usually joined with other materials including stainless steel, Inconel, titanium, and diamond that are finished and ready for direct assembly into customers’ tools.